3D printed Rhinestone Sorter or Flipping Trays - Multiple Colors available

Bundles will come mixed colors. We don't matching color bundles.

—————————————————————

This is a 3D printed Rhinestone Sorter size SMALL
Inside approx 1 1/2 inches
Each section has about 1/2 inch of sorting area
Total height is just slightly over 5 inches
Segments included Top, SS20, SS16, SS14, SS12, SS10, SS8, SS6, SS4 & Bottom

With all the segments together pour some unsorted rhinestones in the top. Place the lid (top) on it and shake. As the smaller rhinestones sort through the larger holes and each segment will have its sorted size. 

NEW NEW NEW now available as well.

3pc Stone Flipping Trays - Stack into each other (see Pics)

*3D Printing is an imperfect process and no 2 are the same. Please be aware that superficial imperfections may occur, such as layer seams and visible lines.

 How to use:

 1. Stack the tower with the sizes you want to sort - base on the bottom, larger cup size   higher up.
  2. Pour your rhinestone mix into the top cup.
  3. Put the lid on.
  4. Hold the tower in your hand and give it a few shakes in a swishing motion. For the best results tap the tower with your other hand.
5. When separating the cups, be light-handed. There may be some stragglers loose.

Note:
• Colors may slightly vary due to differences in filament color.
• I tested the sorter with stones from IPP. It can happen that a few stones will be sorted one level up or down from their size as it heavily depends on the stone size quality - not all stones are perfectly round. Generally, the sorter works 99% of the time.
• I test each cup before sending it to you ❤️
• Do not expose to temperature above 60C / 140F.
• Do not wash in dishwasher.
• This is not a toy.